TV Mounting in Memphis, TN
Mounting a TV in Memphis is rarely just finding a stud and driving four lag bolts. The walls in this city run the full range. Midtown's older homes have plaster over wood lath that cracks if you drill it wrong, and the studs aren't always where a stud finder says they are. East Memphis ranches often have painted brick or paneled walls, and the family room fireplace is usually brick or stone. Newer homes in Cordova, Bartlett and Germantown have tall great rooms with the fireplace as the obvious spot for the screen. Downtown lofts can have exposed brick, concrete or steel. Each one needs different anchors, different drilling, and sometimes a different plan altogether.
We start by figuring out what's actually behind the wall and where the TV should sit for comfortable viewing — at eye height from the couch, not up near the ceiling, unless that's truly the only option. We pick a fixed, tilting or full-motion bracket that suits the room and the TV's weight, anchor it into framing or masonry with the right hardware, and level it carefully. Cables get hidden inside the wall where it's safe to do so, or run in a neat paintable channel where it isn't. Before we leave, we connect your devices, test everything, and clean up the drilling dust.
What this covers
- Fixed, tilting and full-motion bracket installation
- Mounting on drywall, plaster, brick and concrete
- Over-fireplace mounting with heat and angle check
- In-wall cable concealment where code allows
- Surface cable channels painted to match
- Soundbar and small speaker mounting
- Streaming box and device hookup
- Removal of old mounts and wall patching
How a TV mounting visit usually goes
Plan the Placement
We look at the room, the seating and the wall, find the framing or masonry, and agree with you on height and bracket type before drilling anything.
Secure the Mount
The bracket gets anchored into studs, a backer board or masonry with the right hardware for the wall and the TV's weight, then leveled.
Hang and Route Cables
We hang the TV, run power and cables in the wall or in a clean surface channel, and mount any soundbar or devices you want with it.
Test and Tidy
We connect your devices, check picture and sound, make sure the mount moves or tilts properly, and vacuum up the dust before we go.
Move-ins drive a lot of our TV work around Memphis. People buying an older Midtown house or a Germantown two-story want the screens up before the boxes are unpacked, and renters in Cordova and East Memphis apartments want a clean setup that won't cost them their deposit. For renters, we can use mounts that leave smaller holes, and we'll patch and touch up properly if you move out later. We also think about safety. Memphis sits near the New Madrid Seismic Zone, and while a big quake isn't something people think about every day, a properly anchored mount and a strapped furniture setup cost very little extra and keep a heavy TV from coming down if the house ever shakes.
What shapes the price in Memphis
TV mounting cost depends on the size of the screen, the type of wall, and how much cable work you want. A mid-size TV on a standard drywall wall with a surface channel is the simplest job. Brick, stone and concrete take more time and masonry anchors, plaster walls need slower drilling and sometimes a backer board, and over-fireplace mounts often need extra planning. In-wall power kits and longer cable runs add time, and full-motion arms cost more than a fixed bracket. Mounting several TVs in one visit, or adding a soundbar while we're there, spreads the trip cost out.
Neighbors often ask
Can you mount a TV on my plaster wall without cracking it?
Yes. We locate the studs by testing rather than trusting a stud finder alone, since plaster and lath can throw readings off. We score and pre-drill through the plaster with the right bits so it doesn't spall, and lag the mount into the framing. If the studs don't line up with where you want the TV, we can mount a backer board across them so the bracket lands right where it should.
Is it OK to mount the TV over the fireplace?
Sometimes. We check how hot the wall gets above the firebox, whether there's a mantel to deflect heat, and how high the screen would end up. If you use the fireplace often, a deeper mantel or a pull-down mount can help. If the screen would sit so high it strains your neck, we'll tell you and suggest another wall.
Can you hide the wires inside the wall?
On most interior drywall walls, yes, using an in-wall power kit made for TVs and a low-voltage pass-through for the cables. Running a regular extension cord inside the wall isn't safe, so when you want a true outlet behind the screen, our licensed electricians add a recessed outlet on the circuit. On brick, stone or exterior walls with insulation, a paintable surface channel is usually the cleaner choice.
Can you mount a TV on an exposed-brick wall in a Downtown loft?
Yes. We drill into solid brick or the mortar joints, depending on the brick's condition, and use sleeve or wedge anchors sized for the load. In older warehouse buildings we check the brick first, because some of it is soft. If your building has rules about drilling into common walls, we'll follow them.
Can you take down my old mount and patch the wall?
Yes. We remove the old bracket, fill and patch the holes, and touch up the paint as closely as we can to the existing color. If you have leftover paint, we'll use it for the best match.
Folks pair this with
Drywall Repair
Drywall Repair →Furniture Assembly
Furniture Assembly →Door Repair & Adjustment
Door Repair & Adjustment →Ceiling Fan Installation
Ceiling Fan Installation →TV Mounting around Memphis
TV Mounting is one of 14 jobs our Memphis handyman crew handles, in Memphis and in nearby communities:
Ready to get your TV Mounting handled?
Send a photo and a sentence — we'll answer with a real price and a real day on the calendar.